Technological & Science
Park, Lavrio, Greece 19500
Τel: (+30) 22920 69312, 22050, 22010
Fax: (+30) 22920 69303
Admixture for waterproofing and thermal protection of any aqueous and acrylic paints.
SurfaPore Thermodry is used as a colour additive to block heat transfer and prevents moisture by turning the paints into waterproof. It eliminates the condensation effect by preventing the growth of "black" and fungus on the walls.
SurfaPore ThermoDry is added to all water-based paints that can be further diluted with water and gives thermo-protective, waterproofing and anti-aging properties. Colour coating with SurfaPore ThermoDry has the ability to prevent heat transfer due to low thermal conductivity, re-emit heat and prevent moisture penetration, resulting in significant energy savings during winter and summer. SurfaPore ThermoDry prevents the dyeing of colours by prolonging their life and enhancing the thermo-protective effect.
After mixing with aqueous and acrylic paints, the paint can be applied to internal and external walls.
Instruction of use: Select paints for interior and exterior use that can be diluted with water by 5-10% before use. Cannot be added to solvent based paints. Shake contents very well before use. It is possible that a solid layer may have developed on top, which will dissapear by shaking well or by stirring. Ensure that the container you select dilutes your amount of paint. By using the paint and SurfaPore ThermoDry container, empty the contents on one container into the other, until your mixture is completely homogeneous.Apply your mix in the same manner you would of applied the paint you selected. It does not alter the drying time of your paint. It does not alter the colour tone. It does not alter the texture in matte finish paints. In satin, eggshell or glossy finish paint, test before application.