Technological & Science
Park, Lavrio, Greece 19500
Τel: (+30) 22920 69312, 22050, 22010
Fax: (+30) 22920 69303
THERMAL PROTECTIVE LIGHTWEIGHT PLASTER
Thermal protective, acrylic, lightweight, rough-textured decorative rendering plaster with waterrepelling and anti-mould properties
FeatherPlast PA1200D is a multifunctional thermo-protective, acrylic plaster, easy to apply for exterior and / or interior surfaces. It is used as the final coating of the masonry, offering a rough end result and high reflectivity of the thermal radiation of the sunlight ("Cold Coating"). The FeatherPlast PA1200D uses inert materials consisting of numerous spheres of closed cell porous air filled with air, thus giving it excellent thermo-protective properties. FeatherPlast PA1200D plaster helps reduce application costs while improving the thermal performance of the building by reducing heating / cooling costs.
As a final, decorative, rough coating on exterior and interior surfaces such as walls, cement boards, gypsum boards, cementitious plasters, old, painted surfaces and ceilings.
Applicability: Stir until homogenized. Cement and new masonry substrates must mature for more than 3-4 weeks prior to primer application. Apply the FeatherPlast PA1200D evenly over the surface with a spatula and lay it so that the layer has the size of the plaster grain. When the coating begins to "pull", rub with a special plastic flue or metal spatula, depending on the desired effect.
Preparation: The surface of the substrate must be clean of dust, grease, mould, rust and loose debris. Particular attention should be paid to old painted surfaces. For best results apply before applying SurfaMix P primer.
Spreading rate: 0,72L/m2 (0,90 kg/m2),
Drying time: 24 hours in normal conditions and good ventilated areas.