 |
 |
|
 |
Products / SurfaPore® W
 SurfaPore W was developed based on the unique properties of wooden surfaces. A combination of active ingredients repels water without changing the natural appearance of wood. It can be applied as a primer before the application of varnish or any other coating.
SurfaPore W provides excellent dimensional stability even in the most humid environment. It actively repels water, blocking the decay of your favourite wooden surfaces. Very versatile and easy to apply, it does not contain insecticides or preservatives but the active dehydration of the core of the wood makes it resistant to deterioration.
|
| |
 |
Application Area & Characteristics: |
| Nanotechnology for absorptive wooden surfaces, with a simple application pattern. |
| Repelling water while retaining natural look. |
| Prevents cracking & warping. |
| Varnishes can be applied on top. |
|
|
|
| |
Application Notes:
The application surface should be dry and clean. Apply SurfaPore W by using a brush, a roller or spraying. No dilution is required. Dipping: Dip the wooden surface in SurfaPore W for 30 seconds. Remove any application excess. In any case (surface application or dipping) test results on a small area before full scale application. Maximum water repellence is achieved 24 hours after application. Recommended application temperature is above 5oC.
Consumption Rate: 6-8 square meters per litre of SurfaPore® W.
Packaging: PE Containers 1L, 4L, 30L, IBC 1000L.
|
| |
|
Nanotechnology for Absorptive Wooden Surfaces
|
|
|
 |
|
| |
SurfaShield®, SurfaPore® and DesalIn® are registered trademarks of NanoPhos SA |
