 |  |
|  | Products / SurfaPore® T
 Staining of marble, granite and porous porcelain tiles can be disastrous for these valuable surfaces. SurfaPore T creates an impermeable and invisible shield by blocking even the finest pores of these surfaces.
Microscopic analysis of marbles, granite and porcelain tiles surfaces reveals multiple interconnected pores that readily collect stains. Subsequently, these surfaces lose their shine and become discoloured. Cleaning them requires significant effort and some stains are impossible to remove. SurfaPore T can be easily applied on your existing or new surfaces and preserve their appearance.
| | |  | | Application Area & Characteristics: | | Nanotechnology for marbles, granites, porous porcelain tiles. | | Effectively seals pores that readily absorb stains, without creating film. | | Deep surface penetration and effectiveness. | | Abrasion resistant activity, as modification takes place inside pores and not on the surface. | | Does not change the natural appearance or turn yellowish. | | | | |
Application Notes:
The application surface should be dry and clean. Apply SurfaPore T by using a brush, a roller or spraying. No dilution is required. After 15 minutes and before SurfaPore T dries completely, remove any excess and polish, by using a wet cloth. On sensitive surfaces, reapply within 3 hours. Test results on a small area before full scale application. Maximum effectiveness is achieved 24 hours after application.
Consumption Rate: 14-20 square meters per litre of SurfaPore® T.
Packaging: PE Containers 1L, 4L, 30L, IBC 1000L. Product
Data Sheet: SurfaPore T PDS (PDF 286KB) | | | Nanotechnology for protecting marble, granite and porcelain surfaces from staining. |
| |  | | | | DeSalin®, SurfaGuard®, SurfaMix®, SurfaPore®, SurfaShield®, and ThermoDry® are registered trademarks of NanoPhos SA | 