 |
 |
|
 |
Products / SurfaPore® R
 SurfaPore R protects your clay surfaces from water penetration. Ceramics and roof tiles are effectively protected from deterioration and from the unsightly “greening” of mould growth.
SurfaPore R preserves the aesthetics of your clay surfaces while protecting them against water and ageing. Due to their unique nature, SurfaPore R was designed to exactly “fit” the structural and surface properties of clay based materials.
After applying SurfaPore R, your clay surfaces repel water and can remain dry even after rain! Protect your roof tops and favourite clay based surfaces from “greening” and getting mouldy!
|
| |
 |
Application Area & Characteristics: |
| Nanotechnology for any clay-based surface, like roof tiles, pottery and cotto tiles. |
| Prevents surface corrosion and the “nasty greening” of your favourite surfaces. |
| Prevents growth of algae, mould and microorganisms. |
| Prevents white spots and salt deposits (efflorescence). |
| Simple surface application, retaining “breathing” without change of natural appearance. |
| Protects from frost threat. |
|
|
|
| |
Application Notes:
Surface Application: The application surface should be dry and clean. Apply SurfaPore R by using a brush, a roller or spraying. No dilution is required. On very absorptive surfaces re-apply within 3 hours. Dipping: Dip the clay based surface in SurfaPore R for 30 seconds. In any case (surface application or mixing) test results on a small area before full scale application. Maximum water repellence is achieved 24 hours post application.
Consumption Rate: 9-11 square meters per litre of SurfaPore® R.
Packaging: PE Containers 1L, 4L, 30L, IBC 1000L.
|
| |
|
Nanotechnology for any clay based surface such as roof tiles, cotto and pottery.
|
|
|
| <../img src="images/box_buttom.jpg" alt="" width="931" height="27" /> |
|
| |
SurfaShield®, SurfaPore® and DesalIn® are registered trademarks of NanoPhos SA |
