DeSalin K is a special cleaning formulation for fast and effective action. It is ideal for the removal of stains created by the use of “sticky” paint resins, cement residues and adhesive building material. Stucco, mortar, grout and plastic components can be removed efficiently. Alternatively, mortar and grout surfaces can be cleaned and restored. For minor stain loads, DeSalin K can be diluted with tap water.
Application Area & Characteristics:
Ideal for removing grout residue after laying floor tiles.
Removes rust from stones and cement surfaces.
Quick and effective action.
Can be diluted with water, for lightly soiled surfaces.
Should not be applied on sensitive surfaces, such as marbles.
Application Notes:
Rinse the stained surface with DeSalin Κ without diluting or up to 1:5 dilution ration for slightly stained surfaces. Wait for DeSalin K to act on the surface for about a minute. Remove residues by scrubbing with a hard sponge (do not use metallic sponges). After removal, wash with plenty of water. Attention The use of protective clothing (gloves and resistant clothing) is required due to the acidic character of the formulation. Do not apply on metallic surfaces. Test the formulation on a minor non-visible surface to determine its chemical resistance and prevent potential damages. Do not mix with chlorines, bleach and sodium hypochlorite
Consumption Rate: 6-8 square meters per kg of DeSalin® K. Packaging: PE Containers1Kg, 4Kg, 30Kg, Barrel 200Kg & IBC 1000Kg. Materials Safety Data Sheet: Click here. (DeSalin K MSDS En)
Cement & Paints Residue Cleaner for Resistant Surfaces
Watch SurfaPore® C
Video in Action
Products
SurfaPore® C
SurfaPore® R
SurfaPore® T
SurfaPore® M
SurfaPore® W
SurfaPore ThermoDry®
DeSalin® C
DeSalin® K
DeSalin® T
SurfaShield®, SurfaPore® and DesalIn® are registered trademarks of NanoPhos SA
DeSalin K is a special cleaning formulation for fast and effective action. It is ideal for the removal of stains created by the use of “sticky” paint resins, cement residues and adhesive building material. Stucco, mortar, grout and plastic components can be removed efficiently. Alternatively, mortar and grout surfaces can be cleaned and restored. For minor stain loads, DeSalin K can be diluted with tap water.
